Below is a list of the safety videos and DVDs that can be borrowed from SECURA Insurance. To order, please call 1-800-236-8700, extension 4639 in Wisconsin; for all other states, call 1-800-558-3405, extension 4639 or by e-mailing Risk Management. The videos and DVDs should be returned within 30 days.
CONSTRUCTION FALL PROTECTION (VHS and DVD)
Some accidents don't allow you the time to learn from your mistake. Falling from a dangerous height is an accident that rarely offers you a second chance. This program teaches your employees the importance of using the correct fall protection. The informative video provides a detailed illustration of the various types of fall protection and how to properly use them to avoid a deadly fall. (12 minutes)
CRANE SAFETY (DVD)
Crane operators have certain responsibilities, but each person on the job site also has a responsibility when working near cranes. Excellent program in demonstrating safety practices. (13 minutes)
FLAGGER SAFETY (VHS)
Detailed video, accompanying reference booklets, and an instructional poster to provide fast, efficient training on key aspects of flagging safety. This valuable kit covers:
- work zone hazards, the flagger's role and responsibilities, employer's responsibilities, personal protective equipment, "tools of the trade" (flags, radios and paddles),
- flagging procedures, special situations (two flaggers, nighttime flagging, etc.)
- flagger etiquette and more! (13 minutes)
GROUND FAULT CIRCUIT INTERRUPTER (GFCI) (DVD)
Designed to train all employees in the use of GFCI and how the system operates. Program also explains elements of the mandatory GFCI written program. Will increase electrical safety awareness. (11 minutes)
HAND-HELD CUTOFF SAWS (DVD)
Safe and Efficient Operation ( 17 minutes)
One of the most common job-site tools is the gas-powered, cut-off saw. Few saw users have had any training in correct use of gas-powered saws. This video can provide safety dividends that will provide a lifetime of paybacks.
- Primary focus on gasoline-powered saws
- Discusses saw adjustments, safety devices
- Correct blade type and application
- Correct saw starting techniques
- Care and cleaning of the saw
LADDER SAFETY IN CONSTRUCTION (DVD)
Designed for step and straight ladders. Defines safety requirements, belt buckle rule, 4:1 ratio of straight ladders, how to reduce ladder injuries, and unsafe behavior. (9 minutes)
PORTABLE GRINDERS & ABRASIVE WHEELS (DVD)
This program includes general safety rules, ring testing, handling of abrasive wheels, and how to prevent injuries when operating this equipment. (13 minutes)
POWDER ACTUATED TOOLS (DVD)
Operating these tools requires appropriate training. Defines equipment, types of loads, potential hazards, and appropriate safety procedures when operating this equipment. (10 minutes)
POWER TOOL SAFETY 1 Video, 4 sections
- Power Tool Accidents - They Can Be Prevented 19:20 min
- Circular Saw safety - 25 minutes
- Table Saw Safety - 19 minutes
- Miter Saw Safety - 14:30 minutes
RIGGING AND LIFTING WITH SMALL HYDRAULIC CRANES (DVD)
Various types of rigs such as basket hitches or choker hitches explained. Helps the viewer understand hitch angles and their effect on sling, chain, or wire rope ratings. Inspection of slings and sling hardware with effective visual examples of how to examine rigging equipment. (Inspecting the rigging, inspection records requirements, the difference between tie-down and lifting chain, unacceptable rigging hardware, effects of hitch angles on load connectors and hardware) (24 minutes)
ROAD CREW SAFETY (DVD)
Safe Practices for Road Construction and Paving Crews (26 minutes)
Examines dangers inside the work zone and offers advice to lower the risks. Working in close proximity to heavy equipment causes more accidents than high speed incursions into work zones by passing vehicles.
- Personal responsibility
- Strong emphasis on NIGHT OPERATIONS
- Prior-to-job-start work site inspection
- Major accident causes from insurance company & OSHA stats
- Machine accident causes on job sites
SCAFFOLDING SAFETY (DVD)
Scaffolds can present extremely hazardous situations when they aren't erected or dismantled properly. Don't let an accident at your site become news. Teach your employees how to stay safe.
- Assembly and dismantling requirements
- Types of scaffolds
- Potential hazards
- Ladder construction and usage (19 minutes)
SKY'S THE LIMIT - SCISSOR AND AERIAL PLATFORM SAFETY (DVD)
Working on scissor and aerial platforms can be very dangerous. This DVD highlights potential hazards associated with construction work performed on elevated platforms. (15 minutes)
SLIDING BOOM (TELESCOPIC) FORKLIFT OPERATING TECHNIQUES (DVD)
Telescopic forklift operators are subject to difficult conditions. Includes: working conditions, jobsite personnel, proper use of hand signals, and avoiding power lines. Offers 10 rules to live by. (Importance of load charts/center-of-gravity, roading the forklift and hills, steering options and leveling the load) (18 minutes)
THE ALERT DRIVER (VHS)
A trucker's guide to sleep, fatigue and rest in our 24-hour society. (19 minutes)
BACKING (VHS)
Focuses on the common problem areas where accidents often occur. The program emphasizes on-the-job application of critical backing skills. (7 minutes)
COACHING THE PROFESSIONAL TRUCK DRIVER (VHS)
Capitalizes on truck drivers' experience, continuously requiring them to analyze, discuss, and think about real issues. Objective is to counter those bad driving habits, both skill- and attitude-related, that are most frequently exhibited by the experienced professional truck driver. Includes 20 application slides. (45 minutes)
COACHING THE VAN DRIVER (VHS)
Includes vehicle inspection, vehicle characteristics, safe driving skills, driving environments, and transporting cargo and passengers. Includes six transparencies of traffic situations. (45 minutes)
COUPLING AND UNCOUPLING (VHS)
Provides a review of crucial procedures in step-by-step fashion. The emphasis is on areas where problems - some of them very costly - are encountered. (7 minutes)
DEFENSIVE DRIVING: I COULD SEE IT COMING (DVD)
If you have employees who use step vans, autos or cargo vans on the job, it is important for you as an employer to teach them about the unique handling skills needed to safely operate these vehicles. This program will help you conduct defensive-driving training sessions for new and existing employees.
It covers the factors that cause accidents and then provides seven strategies for driving defensively. (15 minutes)
- Get ready.
- Stay focused.
- Be aware.
- Look ahead.
- Back off.
- Expect mistakes.
- Be noticed.
DUMP TRUCK SAFETY (DVD)
Safety awareness program that emphasizes job site safety procedures for operators. Reviews checklist on daily maintenance inspections, and loading/ unloading procedures. (15 minutes)
EXTREME WEATHER DRIVING (VHS)
Deals with recognizing and anticipating hazards associated with extreme weather: rain, ice, snow, fog and heat. (7 minutes)
FLATBED CARGO SECUREMENT (VHS)
Gives your drivers a basic understanding of the cargo securement rules, and safe cargo securement practices. Plus, it specifically focuses on flatbed and other open trailers.
Includes an instructor's guide, 10 driver handbooks, wallet cards, a training log, two awareness posters, and a reprint of the regulation.
GET BIG ON SAFETY . . . IT'S YOUR LIFE (YOUTHFUL DRIVERS) (VHS)
Safety tips for young drivers.
NIGHT DRIVING (VHS)
Looks at driver, roadway and vehicle factors that can lead to potential hazards. Procedures and adjustments for safer night operation are recommended. (7 minutes)
SEEING HAZARDS (VHS)
Zeros in on seeing skills and how they can help drivers keep hazards from becoming emergencies. Aiming high, scanning and other techniques are covered. (7 minutes)
SNOWPLOW SAFETY (DVD)
Many snowplow training videos focus on the mechanics of operating different kinds of plows - use of an auger, spreader rates, when to plo w , etc. , or how to drive a truck . B ut few of them deal t with collision issues...until the Snowplow Safety T video was produced. Ideal for training newly hired snowplow operators or as a refresher for experienced operators , this video can be used in a classroom setting or as self-study. Topics addressed include equipment inspection, positioning of the truck, scanning, mirror use and defensive driving techniques. Also included in the video presentation are on-screen diagrams that allow for self-study or group discussion of collision prevention techniques. (23 minutes)
TRUCK FIRES (VHS)
Examines causes, prevention and what to do in case of fire. Cab, engine, tire and cargo fires are all addressed. (7 minutes)
VEHICLE INSPECTION: STRAIGHT TRUCK (DVD)
For straight trucks without air brakes.
VEHICLE INSPECTION (DVD)
Highway safety begins and ends with a proper vehicle inspection. (21 minutes)
LIFTING (VHS)
Demonstrates proper back-protecting techniques for lifting and moving objects.
BACK EXERCISES (VHS)
Explains the structure of the back and how exercise can keep it strong and injury - resistant. Demonstrates a number of exercises to strengthen the back and related areas, most of which can be done right at one's desk or workstation.
BACK INJURY PREVENTION (VHS and DVD)
Back injuries are the #1 workplace safety problem and the #1 workers' compensation expense. Using common sense, simple exercises, proper lifting procedures, and having an understanding of back stress can help you teach employees to take care of their backs. It's your key to reinforcing a company-wide culture that embraces healthy and strong backs. (11 minutes)
COMPUTER USAGE (VHS)
Helps eliminate complacency by reminding viewers of the serious injuries, including cumulative trauma disorders (CTDs) that can be sustained by people in safe office environments. Examines common CTD's including carpal tunnel syndrome, tendinitis, and rotator cuff injuries, demonstrating how they result from a combination of activities, and gives advice on arranging one's workstation.
CTD PREVENTION FOR EMPLOYEES (DVD)
Cumulative trauma disorders cost companies an estimated $25-40 billion each year. Fortunately, many cumulative trauma disorders can be avoided with a simple, proactive approach to creating a healthy work environment. This comprehensive program arms your employees with valuable, ergonomically correct information, helping them to understand what cumulative trauma disorders are, their causes, and most importantly, how to prevent injuries from occurring. (16 minutes)
ELEMENTS OF BACK CARE (VHS and DVD)
This program will teach employees how to properly care for their backs and prevent injuries. Topics covered include the basic function and design of the back, body mechanics and movement, the importance of periodic stretching throughout the day, and various stretches and exercises. (14 minutes)
ELEMENTS OF ERGONOMICS (VHS) 2 PARTS
Contains two modules designed to provide your employees with an understanding of the importance of ergonomics and how to implement an effective ergonomic plan in your company. Module one, "Basics of Ergonomics," provides a general overview of ergonomics. Module two, "Elements of an Ergonomics Program," outlines the necessary elements of a successful ergonomic program. (23 minutes)
ERGONOMICS AWARENESS (VHS)
Stresses the key role employees can play in identifying ergonomic concerns and making adjustments to their own work habits and processes. It identifies common sources of cumulative trauma disorders (CTDs) and other injuries and suggests initiatives employees can take to protect themselves.
ERGONOMIC TASK ANALYSIS (DVD)
Teaches supervisors and managers how to analyze workplace tasks for potential ergonomic health hazards and how to create solutions to eliminate them. (28 minutes)
MATERIALS HANDLING (VHS)
Explains ways to safely meet the physical demands of pushing, pulling, carrying, lifting and lowering materials. Stresses the importance of planning before handling materials - suggesting that employees consider options, plan routes, stretch properly and use mechanical aids where possible. Discusses the importance of a proper grip, reviews lifting techniques and encourages viewers to vary their workload to allow for periods of rest.
OFFICE ERGONOMICS (VHS)
The quality and comfort level of a worker's environment can greatly effect his/her job performance! Educating your office workers to do their jobs free of stress and strain not only helps to enhance work quality and productivity, but also reduces work-related injuries. This stimulating, easy-to-understand program covers a variety of important ergonomic issues. (17 minutes)
ON THE ROAD: THE LIGHTER SIDE OF LIFTING (DVD)
Follow Mike Melnik as he takes you on a trip and demonstrates how to lift in the real world. A refreshing departure from traditional videos, this program uses humor to effectively teach safe body mechanics in real-life situations. It teaches viewers how to choose the "right lift" and apply these back safety principles in a variety of lifting situations. (18 minutes)
STRETCHING OUT AT WORK (DVD)
This motivational video helps reduce workplace injuries by demonstrating stretching and warm-up exercises on the job. Your employees will learn why it is important to stretch before, during and after working to maintain a healthy body. (12 minutes)
WORKSTATION ADJUSTMENT (VHS)
Encourages employees to adjust their workstations to achieve the right fit for them. It shows optimal heights for work surfaces, proper posture to maintain in seated or standing work, minor modifications that can be made to equipment, and stresses that a workstation can and should be tailored to the needs of the person who works at it.
DIGGER'S NIGHTMARE CONTINUED (DVD)
Seven die when an excavator damages a mall's unmarked gas line. (15 minutes)
IN THE TRENCHES! EXCAVATION SAFETY FOR WORKERS (DVD)
Stresses safe working habits on excavation sites:
- Know potential hazards & soil conditions
- Know & use all protective systems
- Safe work habits & proper emergency procedures (14 minutes)
TIPS FROM THE PROS - BACKHOE/LOADER (DVD)
With a focus on increased productivity, TIPS: Backhoe/Loader is the next level of training for the operator with some experience. (16 minutes)
- TIPS for planning the job
- TIPS for trenching / backfilling
- TIPS for efficient loader use
- TIPS for craning with backhoes
TIPS FROM THE PROS - CRAWLER EXCAVATOR (DVD)
New operators are frequently baffled by an experienced operator's ability to carry a grade, work on a slope, clear a field or move a stump. With a focus on technique, this program is designed to share the collected wisdom of experienced operators. Consider this video advanced training for dozer operators. (18 minutes)
- TIPS on job layout
- TIPS on working slopes
- TIPS on site preparation
- TIPS on cutting and shaping
TIPS FROM THE PROS - WHEEL LOADER (DVD)
- Inspecting the machine & the jobsite
- Planning the job
- Machine adjustments
- Material handling techniques
- Trench back-filling techniques (17 minutes)
SAFELY EXPOSING BURIED UTILITIES (DVD)
Once the utilities are marked, what's next? Knowing the colors and meaning of utility markers is only part of the answer to safe, damage-free digging. Exposing buried utilities in a safe, efficient way is critical. Learn the most efficient and cost effective way with this video: one-call requirements, vacuum systems, damage response, open trench and trenchless, hand digging. (30 minutes)
LANDSCAPE MAINTENANCE SAFETY (DVD SPANISH AND ENGLISH)
Train personnel to take responsibility for safety including: proper attire and PPE; use and maintenance of mowers; string trimmers, chain saws and chippers: Covers threats from chemicals and snakes. (17 minutes)
SAFE LIFTING FOR THE AGRICULTURAL WORKER (VHS)
Safe lifting, pushing and pulling. (30 minutes)
SKID STEER SAFETY (VHS)
Safety information for the skid steer loader operator. (11 minutes)
SAFE LAWN AND GROUNDS MAINTENANCE (VHS)
Topics covered: Good living habits, dressing for safety, safety-conscious working habits, safe tool handling, proper lifting techniques. (30 minutes)
SAFE TRACTOR AND MACHINERY OPERATION (VHS)
Topics covered: Personal hazards, OSHA regulations, highway safety, walk-around inspections, and rollover protection systems. (30 minutes)
AN OUNCE OF PREVENTION (VHS)
A corporate case study describes loss-prevention steps that people at all levels should take throughout a product's life cycle: shared responsibility for loss prevention among all depts., early involvement of legal counsel and loss management director, loss prevention review committee, document writing and retention. (18 minutes)
WARNING SIGNS (VHS)
Addresses the issue of proper warning labeling of products. This comprehensive video uses graphic illustrations to demonstrate the six points required for an effective warning label and how to apply those points to any product design (27 minutes)
WHEN PRODUCTS HARM (VHS)
Demonstrates the need for defensive thinking at every stage of product design, manufacturing, testing, marketing, recall, etc. (37 minutes)
CLOSE CALLS, THE WAKE UP CALL (VHS)
Most accidents are usually preceded by a close call. Look carefully at close calls to see what should be done differently to prevent future accidents. (15 minutes)
GAS WELDING SAFETY (DVD)
Teaches basic safety rules, operating procedures, and safety awareness. Strongly supports fire prevention. Excellent program for the experienced or inexperienced welder. (14 minutes)
HAND & POWER TOOL SAFETY (DVD)
Meets training requirements for employees using hand and power tools. Emphasis on individual's responsibility, equipment maintenance, and general safety rules in the use of these tools. (13 minutes)
IT ONLY TAKES A SECOND (VHS)
Shows 23 accidents - Designed to grab the viewer's attention and focus their thoughts on safety. (3 minutes)
PREVENTING SLIPS, TRIPS AND FALLS (GENERAL INDUSTRY) (DVD)
Program highlights include the causes of slips, trips and falls, how to identify areas of hazard and how to prevent accidents from occurring. (17 minutes)
SEXUAL HARASSMENT IN THE WORKPLACE (VHS)
Identify, stop, or prevent sexual harassment. What to do if you are sexually harassed. (23 min)
ACCIDENT INVESTIGATION (VHS and DVD)
No workplace is exempt from accidents. And since you can't guarantee an accident-free workplace, it is important to know how to properly handle accidents when they occur. This program is designed to equip you with the information you need to understand why accidents occur in your workplace and how to avoid similar occurrences in the future. (12 minutes)
BLOODBOURNE PATHOGENS (VHS)
Protect yourself and your employees from the serious health risks associated with blood borne pathogens. With heightened awareness of potential exposure to HBV and HIV, today's employees are highly motivated to learn the critical steps to protecting themselves. This program will replace fear and misconceptions with hands-on, practical instruction. Everything you need to set up a successful program is incorporated in a clear and logical format. (13 minutes)
CONFINED SPACE ENTRY (VHS and DVD)
To avoid serious hazards associated with a confined space entry, employees must be quick-thinking and fast-acting with their response. In fact, according to recent studies, more than half of all confined space fatalities are would-be rescuers. A safe, easy-to-follow confined space program is life-and-death critical to the safety of your employees. (17 minutes)
EFFECTIVE SAFETY COMMITTEES (VHS)
Keeping your employees safe and free of injury should always be a top priority, but you may often feel overwhelmed with the number of safety issues that need to be addressed. This training program addresses your concerns as you begin the process of establishing a safety committee. It also answers the questions your committee members may have about their role and responsibility in the safety process. Includes additional training sessions designed to provide specific training for safety committee members. (17 minutes)
EMERGENCY PREPAREDNESS (VHS)
Emergencies occur everyday, jeopardizing lives, property and dollars. If one of those emergencies were to happen in your place of work, would your employees respond appropriately? Unfortunately, there is no guarantee for a perfect response to every emergency, but this program will help your employees gain a clear understanding of his or her role if an emergency occurs on the job. The program covers fires, weather emergencies, earthquakes, medical emergencies, and more. (14 minutes)
EYE PROTECTION (VHS)
There are many situations that can be potentially harmful to our eyes. Fortunately, it is a hazard that can easily be eliminated by wearing the proper type of eye protection. This training program will teach your employees how to protect their eyes from debilitating injury. They will learn what types of situations present danger to their eyes and the proper eye protection to use in each situation. (10 minutes)
FIRE EXTINGUISHER (VHS)
Since fire is one of the most common hazards in the workplace, it is important for your employees to know how to properly use a fire extinguisher if a fire should break out. Of course, fire prevention is always the best safety policy to follow, but prevention is not always possible. This program will teach your employees how to calmly and effectively deal with fires and correctly use a fire extinguisher. (10 minutes)
FORKLIFT (VHS and DVD)
A forklift accident can cost your company thousands of dollars in damaged products, wrecked equipment, and injured workers. This comprehensive, award-winning program is designed to provide your employees with the equipment-specific training needed to comply with the OSHA standard. It educates your employees on the most common type of equipment - the sit-down, counter-balanced forklift. Topics covered include how the truck works, how to perform inspections, and how to safely operate the truck. (11 minutes)
HAZARD COMMUNICATION (VHS)
This video, essential as an orientation for your construction workers, explains the Hazard Communication Standard. (16 minutes)
HEARING CONSERVATION (VHS)
Without the proper safeguards, high volume noise can seriously and permanently damage hearing. Teach employees that daily awareness of loud noise areas and proper use of hearing protection equipment are the keys to avoiding a lifetime of hearing loss. (12 minutes)
HOUSEKEEPING (VHS)
The importance of keeping your facility neat and clean is often overlooked. This award-winning program reinforces the importance of proper housekeeping methods and illustrates the multiple benefits of keeping your work site in order - from increasing safety, to being prepared for emergencies, to improving your image, to better utilizing your space. (12 minutes)
LADDER SAFETY - TOOLBOX SAFETY TALKS (VHS)
(5 minutes) Steps workers can take to be sure they are using a ladder correctly and safely.
LOCKOUT/TAGOUT (VHS)
This video provides a compelling example of how quickly a life-threatening accident can occur if the proper lockout/tagout procedure is not implemented in a work environment. The program is easy to follow and includes a clear outline of each step in the lockout/tagout procedure. Topics addressed include how to identify different energy sources, how to develop lockout/tagout procedures, and how to perform periodic evaluations of the program. (12 minutes)
MACHINE SAFEGUARDING (VHS)
Using clear examples, this program illustrates how to identify and protect workers from hazardous equipment in your workplace. It illustrates the importance of machine safeguarding and outlines the steps you need to take to implement an effective safeguarding system. Also included are hazard assessment forms to help you evaluate your machinery and select proper guards. (11 minutes)
PERSONAL PROTECTIVE EQUIPMENT (VHS)
Personal protective equipment is a simple concept that, when put to effective use, can prevent numerous injuries to your employees. This program provides an informative overview of the various types of personal protective equipment, what types of protective equipment are appropriate in certain situations, and how to correctly use each type of equipment. (10 minutes)
RESPIRATORY PROTECTION (VHS)
This program is designed to provide your employees with the basics of respiratory protection. Revised to meet the new OSHA respiratory standard, the program alerts employees to the importance of protecting their respiratory systems and provides them with helpful tips for maintaining and properly using respirators. Also included is a clear explanation of the requirements of the OSHA standard. (12 minutes)
SAFETY PROGRAM MANAGEMENT (VHS)
Developing a safety program in your company might seem like an overwhelming task. This program transforms what can feel like an unmanageable project into a simple and clear process to which anyone can adhere. Filled with practical advice and information from experienced safety professionals, this five-part module leads you from beginning to end through the steps needed to establish, maintain, and manage an effective safety program. (38 minutes) RESTAURANT FIRE PROTECTION CHANGES - UL STANDARD 300 (VHS)
Updating kitchen equipment to UL Standard 300. (10 minutes)
PREVENTING SLIPS, FALLS, AND LIFTING INJURIES (VHS)
Learn actions that help prevent hazardous slips, trips and falls. Demonstrates proper lifting and carrying techniques that help prevent accidents and injuries. (10 minutes) PREVENTING CUTS AND LACERATIONS (VHS)
Covers care of knives, PPE, lockout/tagout procedures, care with glass. (10 minutes)
PREVENTING FIRES AND BURNS (VHS)
Learn how to protect yourself and guests. (PPE, equipment, clothing, chemicals, serving items, responding to injuries) (10 minutes)
PROTECTING YOURSELF AND CUSTOMERS (VHS)
General safety in a restaurant - accidents can be prevented by thinking first. (10 minutes) FOOD SAFETY FIRST (DVD)
Humorous look at ways to prevent food borne illness. (10 minutes)
|
